3 - 155Chapter 3 Removal and Replacement Procedures (RRPs)RRP4.12 OIL DAMPER (PL 4.1.26)[Removal]1) Remove COVER ASSY RH. (RRP 1.12)2) Remove LEFT COVER. (RRP 1.10)3) Remove MULTIPURPOSE FEEDER COVER. (RRP 1.7)4) Remove LOWER FRONT COVER, COVER FRONT-U. (RRP 1.8)5) Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)6) Remove MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)7) Release the hook of GEAR PICK UP (PL 4.1.19) that fixed to SHAFT ASSY MSI (PL 4.1.4)from MULTIPURPOSE FEEDER ASSEMBLY (PL 4.1.1) and remove GEAR PICK UP.8) Remove two screws (silver, with a flange, tap, 8mm) that fixed DAMPER BRACKET (PL4.1.27) to MULTIPURPOSE FEEDER ASSEMBLY.9) Remove OIL DAMPER (PL 4.1.26) and DAMPER BRACKET from MULTIPURPOSEFEEDER ASSEMBLY.10) Remove OIL DAMPER from DAMPER BRACKET.[Replacement]Pay attention to fitting direction of OIL DAMPER when carrying out the work shownbelow.1) Match the hole of OIL DAMPER (PL 4.1.26) to the boss of DAMPER BRACKET (PL 4.1.27),attach OIL DAMPER to DAMPER BRACKET.2) Match the hole of DAMPER BRACKET to the boss of MULTIPURPOSE FEEDERASSEMBLY (PL 4.1.1), attach OIL DAMPER and DAMPER BRACKET.3) Fix DAMPER BRACKET to MULTIPURPOSE FEEDER ASSEMBLY using the two screws(silver, with a flange, tap, 8mm).4) Attach GEAR PICK UP (PL 4.1.19) to SHAFT ASSY MSI (PL 4.1.4), fix the hook of GEARPICK UP to the groove of SHAFT ASSY MSI.5) Attach MULTIPURPOSE FEEDER ASSEMBLY. (RRP 4.1)6) Attach VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)7) Attach LOWER FRONT COVER, COVER FRONT-U. (RRP 1.8)8) Attach MULTIPURPOSE FEEDER COVER. (RRP 1.7)9) Attach LEFT COVER. (RRP 1.10)10) Attach COVER ASSY RH. (RRP 1.12)
