1 - 189Chapter 1 TroubleshootingVersion 3 2008.05.30FIP1.13 007-340-04 Restart PrinterStep Check Yes NoPossible causative parts:SEPARATOR ROLLER (PL12.5.17)ROLL ASSY FEED (PL12.3.29)PWBA MCU (PL9.1.20)DRIVE ASSY OPT FDR (PL12.2.10)HARN ASSY C2 MOT (PL12.2.9)HARN ASSY FDR UNIT (PL12.2.3)HARN ASSY R SIDE (PL10.1.15)PWBA OPT FDR (PL12.2.6)1Checking the detail error code.A detailed error code is displayed by pushing L key, K keyand 3 key simultaneously.Is "Code:04" displayed on the LCD?Go to step 2."00":Go to FIP1.9."01":Go toFIP1.10."03":Go toFIP1.12.2 Checking the paper cassette for installationIs the paper cassette installed correctly? Go to step 4.Reseat the papercassette, then goto step 3.3 Does the error still occur when the power is turned ON? Go to step 4. End of work4Checking the ROLL ASSY FEEDs and SEPARATORROLLER for rotationDo these ROLLs rotate smoothly?Check the rotation of the ROLLs with a finger.Go to step 5.Replace thedefectiveROLL(s).5Checking the connectors for connectionCheck the connections between the PWBA OPT FDR andDRIVE ASSY OPT FDR.Are P/J422, P/J4221 and P/J4222 connected surely?Go to step 6.Reconnect theconnector(s)P/J422, P/J 4221and/orP/J4222 surely,then go to step 6.6Checking the Feed Motor for rotationDoes the Feed Motor function normally?Checked by [Digital Output] - [DO-19(Control Panel)/OPTION FEEDER1 MOTOR ON(PC)] in diagnosis. Duringthe test, close the Front Cover.Replace thePWBA MCU.(Refer to Removal30/Replacement14)Go to step 7.7 Checking the DRIVE ASSY OPT FDR for installationIs the DRIVE ASSY OPT FDR installed correctly? Go to step 8.Reseat theDRIVE ASSYOPT FDR, thengo to step 8.8 Does the error still occur when the power is turned ON? Go to step 9. End of work9Checking the connectors of the DRIVE ASSY OPT FDR forconnectionCheck the connections between the PWBA OPT FDR andDRIVE ASSY OPT FDR.Are P/J422 and P/J4222 connected surely?Go to step 10.Reconnect theconnector(s)P/J422 and/orP/J4222 surely.
