8 – 8Chapter 8 Printer SpecificationsVersion 1 2007.12.284. Functions4.1 Recording SystemElectro-photographic system employing OPC drum and direct transfer by the transport belt4.2 Exposure SystemSemiconductor four laser beams scanning system4.3 Development SystemDevelopment with dry type 2-component developer4.4 Fixing SystemThermal fixing system by Free Belt Nip Fusing (FBNF)4.5 Resolution- Main scanning direction:by the printer controller- Sub scanning direction:600 dots/25.4mm (fixed)4.6 Operation ModeThe printer can be operated in either of 4 operation modes. The modes are switched over by commandfrom the printer controller or change of printer operation, etc.Proceeding from power ON, low power mode or sleep mode to standby mode will take place after goingthrough a warm up stage.- Running modeState in running or recording operationFixing system: Held at operating temperature.Exposure system: Operating statusRecording system: Operating status- Ready modeReady stateFixing system: Held at ready temperature.Exposure system: Stop statusRecording system: Stop status- Sleep modeComplete resting state. Compatible to E-Star and BAM requirement.Fixing system: Stop statusExposure system: Stop statusRecording system: Stop status- Deep sleep modeResting state from the sleep state. Compatible to E-Star and BAM requirement.Fixing system: Stop statusExposure system: Stop statusRecording system: Stop status
