1 - 261Chapter 1 TroubleshootingVersion 1 2008.02.15FIP1.61 010-359 Restart PrinterStep Check Yes NoPossible causative parts:FUSER ASSY (PL6.1.10)PWBA MCU (PL9.1.20)1Checking the FUSER ASSY for installationIs the FUSER ASSY installed correctly?Warning: Start the operation after the FUSER ASSYhas cooled down.Does the error still occur when the power is turned ON?Go to step 2. End of work2 Checking the FUSER ASSY typeIs the FUSER ASSY installed the 3130cn FUSER? Go to step 3. Replace theFUSER ASSY.3Checking after replacing the FUSER ASSYReplace the FUSER ASSY. (Refer to Removal 8/ Replace-ment 36.)Warning: Start the operation after the FUSER ASSYhas cooled down.Does the error still occur when the power is turned ON?Replace thePWBA MCU.(Refer to Removal30/Replacement14.)End of work
