3 - 148Chapter 3 Removal and Replacement Procedures (RRPs)Version 1 2008.01.08Replacement 26 SIZE SWITCH ASSEMBLY (PL7.1.18)1) Replace the clamp to the SIZE SWITCH ASSEMBLY.2) Insert the backside tab of the SIZE SWITCH ASSEMBLY into the hole on the printer andinsert the two bosses of the SIZE SWITCH ASSEMBLY into the holes on the printer.3) Secure the SIZE SWITCH ASSEMBLY to the printer using the one screw (silver, tap, 10mm).4) Engage the connector (P/J291) of the SIZE SWITCH ASSEMBLY.5) Secure the harness using the clamp of the SIZE SWITCH ASSEMBLY.Go to the next replacement step:Replacement 33 RIGHT COVER (PL1.1.6)Zna03089KA4)1)3)2)-12)-25)
