3 - 33Chapter 3 Removal and Replacement Procedures (RRPs)Version 1 2008.01.08Removal 18 SIZE SWITCH ASSEMBLY (PL7.1.18)Steps 1 through 4 are for reference. Before removing this component, check that Steps 1 through 4have been performed.1) Open the FRONT COVER (PL1.2.1).2) Remove the FUSER. (Removal 8)3) Remove the REAR COVER. (Removal 10)4) Remove the RIGHT COVER. (Removal 11)5) Release the clamp on the SIZE SWITCH ASSEMBLY (PL7.1.18), and then remove the har-ness.6) Disengage the connector (P/J291) of the SIZE SWITCH ASSEMBLY.7) Remove the one screw (silver, tap, 10mm) that fixes the SIZE SWITCH ASSEMBLY to theprinter.8) Remove the SIZE SWITCH ASSEMBLY by releasing the two bosses and the backside tab ofthe SIZE SWITCH ASSEMBLY from the holes on the printer.9) Remove the clamp from the SIZE SWITCH ASSEMBLY.Zna03029KA5)6)8)9)7)
