5-8 Dell PowerEdge 6100/200 System User’s GuideFigure 5-3. Change Configuration Settings Menu3. To view or change the settings for a particularcard, highlight the name of the card and press.A list of options appears on the screen.To select a category on the list of system boardoptions, press the up- or down-arrow key to high-light the category and press . A pop-up menuappears, listing the options for that category. Toselect an option, press the up- or down-arrow key tohighlight the option and press .NOTES: Several system board categories allow youto edit such resources as memory address, I/O ports,IRQs, and DMA channels. It may be necessary toedit these resources to resolve a configurationconflict.The Change Configuration Settings feature isintended for users who are technically knowledge-able. Do not change resource settings from theirdefaults if you do not understand how such a changewill affect system performance.While in the Change Configuration Settings menu,you can press to enter the Advanced Optionsmenu. See “Advanced Options Menu” later in thischapter for more information.4. Select Step 4: Save Configuration to save yourchanges.5. Press , select Step 6: Exit, and follow theonline instructions.Remember to save a written copy of the newinformation.System Board Configuration OptionsCategories related to the system board are organized intothe following major groups:• Systems Group• Memory Subsystem Group• On-Board Disk Controllers• On-Board Communication Devices• Floppy Drive Subsystems GroupStep 3: Change Configuration SettingsSystem Board System BoardPCI RAM Device Bus 0 Dev 14PCI SCSI Device Bus 1 Dev CPCI SCSI Device Bus 1 Dev B- This step is optional, you may skip it by pressing ESC and allconfiguration settings will remain unchanged.- Press ENTER to view or change a board’s configuration settings.- Press ESC when you are satisfied with the current settings.[Select=ENTER] [Remove=DEL] [Done=ESC] [Advanced Options=F9] [Help=F1][ISA/EISA Lock Toggle=F8]
