Item Indicator, Button, orConnector Icon DescriptionTo reset iDRAC (if not disabled in F2 iDRAC setup)press and hold for more than 15 seconds.2 System identificationconnectorAllows you to connect the optional system statusindicator assembly through the optional cablemanagement arm.3 iDRAC7 Enterprise port Dedicated management port.NOTE: The port is available for use only if theiDRAC7 Enterprise license is installed on yoursystem.4 PCIe expansion card slot(riser 1)Allows you to connect a Fibre Channel or PERCH810 card.5 Serial connector Allows you to connect a serial device to thesystem.6 Video connector Allows you to connect a VGA display to the system.7 PCIe expansion card slot(riser 2)Allows you to connect a PCIe expansion card.8 USB connectors (2) Allows you to connect USB devices to the system.The ports are USB 2.0-compliant.9 Ethernet connectors (4) Four integrated 10/100/1000 Mbps NICconnectors10 PCIe expansion card slot(riser 3)Allows you to connect a PCIe expansion card.11 Power supply (PSU1) 750 W12 Power supply (PSU2) 750 WNIC indicator codesFigure 4. NIC Indicator1. link indicator 2. activity indicator11
