8System messagesSystem error messagesSystem messages appear on the monitor to notify you of a possible problem with the system. Thesemessages refer to events recorded in the System Event Log (SEL). For information on the SEL andconfiguring system management settings, see the systems management software documentation.Some messages are also displayed in an abbreviated form on the system's LCD, if the system includesthat feature.NOTE: If you receive a system message not listed here, check the documentation of the applicationthat was running when the message was displayed or the operating system's documentation for anexplanation of the message and recommended action.NOTE: In some messages, a particular system component is identified by name (“”)component number (“”), or location (“bay”).Error Code Message InformationAMP0302 Message The system board <name> current is greater than the upperwarning threshold.Details System board <name> current is outside of the optimumrange.Action 1. Review system power policy.2. Check system logs for power related failures.3. Review system configuration changes.4. If the issue persists, see Getting Help.AMP0303 Message The system board <name> current is greater than the uppercritical threshold.Details System board <name> current is outside of the optimumrange.Action 1. Review system power policy.2. Check system logs for power related failures.3. Review system configuration changes.85
