Running the embedded system diagnosticsThe embedded system diagnostics program is run from the Dell Lifecycle Controller.CAUTION: Use the embedded system diagnostics to test only your system. Using this programwith other systems may cause invalid results or error messages.1. As the system boots, press .2. Use the up and down arrow keys to select System Utilities → Launch Dell Diagnostics.The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in thesystem. The diagnostics starts executing the tests on all the detected devices.System diagnostic controlsMenu DescriptionConfiguration Displays the configuration and status information of all detected devices.Results Displays the results of all tests that are executed.System health Provides the current overview of the system performance.Event log Displays a time-stamped log of the results of all tests run on the system. This isdisplayed if at least one event description is recorded.For information about embedded system diagnostics, see the ePSA Diagnostics Guide (Notebooks,Desktops and Servers) at dell.com/support/home.75
