Menu Item DescriptionNOTE: BIOS updates using the Dell Update Package are not affected by thisoption.Power Button Allows you to enable or disable the power button on the front of the system. Bydefault, the Power Button option is set to Enabled.NMI Button Allows you to enable or disable the NMI button on the front of the system. Bydefault, the NMI Button option is set to Disabled.AC PowerRecoveryAllows you to set how the system reacts after AC power is restored to the system.By default, the AC Power Recovery option is set to Last.AC PowerRecovery DelayAllows you to set how the system supports staggering of power up after AC poweris restored to the system. By default, the AC Power Recovery Delay option is set toImmediate.User Defined Delay(60s to 240s)Allows you to set the User Defined Delay when the User Defined option for ACPower Recovery Delay is selected.Miscellaneous settingsMenu Item DescriptionSystem Time Allows you to set the time on the system.System Date Allows you to set the date on the system.Asset Tag Displays the asset tag and allows you to modify it for security and trackingpurposes.KeyboardNumLockAllows you to set whether the system boots with the NumLock enabled ordisabled. By default the Keyboard NumLock is set to On.NOTE: This option does not apply to 84-key keyboards.Report KeyboardErrorsAllows you to set whether keyboard-related error messages are reported duringsystem boot. By default, the Report Keyboard Errors option is set to Report.F1/F2 Prompt onErrorAllows you to enable or disable the F1/F2 prompt on error. By default, F1/F2Prompt on Error is set to Enabled.In-SystemCharacterizationThis option enables or disables In-System Characterization. By default, In-SystemCharacterization is set to Enabled.System and setup password featuresYou can create a system password and a setup password to secure your system. To enable creation ofthe system and setup password, the password jumper must be set to enabled. For more information onthe password jumper settings, see System Board Jumper Settings.SystempasswordThis is the password that you must enter before you can boot your system.24