Menu Item DescriptioniDRAC Settings This option is used to view and configure iDRAC settings.Device Settings This option is used to view and configure device settings.System BIOS screenNOTE: The options for System Setup change based on the system configuration.NOTE: System Setup defaults are listed under their respective options in the following sections,where applicable.Menu Item DescriptionSystemInformationDisplays information about the system such as the system model name, BIOSversion, Service Tag, and so on.Memory Settings Displays information and options related to installed memory.Processor Settings Displays information and options related to the processor such as speed, cachesize, and so on.SATA Settings Displays options to enable or disable the integrated SATA controller and ports.Boot Settings Displays options to specify the boot mode (BIOS or UEFI). Enables you to modifyUEFI and BIOS boot settings.Integrated Devices Displays options to enable or disable integrated device controllers and ports, and tospecify related features and options.SerialCommunicationDisplays options to enable or disable the serial ports and specify related featuresand options.System ProfileSettingsDisplays options to change the processor power management settings, memoryfrequency, and so on.System Security Displays options to configure the system security settings like, system password,setup password, TPM security, and so on. It also enables or disables support forlocal BIOS update, the power and NMI buttons on the system.MiscellaneousSettingsDisplays options to change the system date, time, and so on.System information screenMenu Item DescriptionSystem ModelNameDisplays the system model name.System BIOSVersionDisplays the BIOS version installed on the system.System Service Tag Displays the system Service Tag.SystemManufacturerDisplays the name of the system manufacturer.17