Menu Item DescriptionLevel 3 Cache Displays the total L3 cache.Number of Cores Displays the number of cores per processor.SATA settings screenMenu Item DescriptionEmbedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID modes. By default,the Embedded SATA option is set to AHCI.Port E Auto enables BIOS support for the device attached to SATA port E. Off disablesBIOS support for the device. By default, Port E is set to Auto.Port F Auto enables BIOS support for the device attached to SATA port F. Off disablesBIOS support for the device. By default, Port F is set to Auto.Boot settings screenMenu Item DescriptionBoot Mode Allows you to set the boot mode of the system.CAUTION: Switching the boot mode may prevent the system from booting ifthe operating system is not installed in the same boot mode.By default, the Boot Mode option is set to BIOS.NOTE: UEFI is not supported on this system.Boot SequenceRetryAllows you to enable or disable the boot sequence retry feature. If this field isenabled and the system fails to boot, the system reattempts the boot sequenceafter 30 seconds. By default, the Boot Sequence Retry option is set to Disabled.BIOS Boot Settings Allows you to enable or disable BIOS Boot options.NOTE: This option is enabled only if the boot mode is BIOS.UEFI Boot Settings Allows you to enable or disable UEFI Boot options.NOTE: This option is enabled only if the boot mode is UEFI.One-Time Boot Allows you to enable or disable a one-time boot from a selected device.Integrated devices screenMenu Item DescriptionIntegrated RAIDControllerAllows you to enable or disable the integrated RAID controller. By default, theIntegrated RAID Controller option is set to Enabled.User AccessibleUSB PortsAllows you enable or disable the user accessible USB ports. Selecting Only BackPorts On disables the front USB ports and selecting All Ports Off disables both20