Figure 12. Removing The Memory Module1. memory module/memory-module blank7. Install the cooling shroud.8. Close the system.9. Reconnect the system to its electrical outlet and turn the system on, including any attachedperipherals.Installing memory modulesWARNING: The memory modules are hot to the touch for some time after the system has beenpowered down. Allow time for the memory modules to cool before handling them. Handle thememory modules by the card edges and avoid touching the components or metallic contacts onthe memory module.CAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.CAUTION: To ensure proper system cooling, memory-module blanks must be installed in anymemory socket that is not occupied. Remove memory-module blanks only if you intend to installmemory modules in those sockets.NOTE: Only Dell memory modules are supported.1. Turn off the system, including any attached peripherals, and disconnect the system from theelectrical outlet.2. Open the system.3. If applicable, remove the cooling shroud.4. Locate the memory-module sockets.CAUTION: Handle each memory module only by the card edges, making sure not to touchthe middle of the memory module or metallic contacts. To avoid damaging the memorymodule, handle only one memory module at a time.5. If a memory module or a memory-module blank is installed in the socket, remove it.NOTE: Retain removed memory-module blank(s) for future use.36