856 | Routing Information Protocol (RIP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m Figure 40-14. Using show ip routes for Core 3 RIP SetupFigure 40-15. Using show ip protocols Command to Show RIP Configuration Activity on Core 3Core3#show ip routesCodes: C - connected, S - static, R - RIP,B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,> - non-active route, + - summary routeGateway of last resort is not setDestination Gateway Dist/Metric Last Change----------- ------- ----------- -----------R 10.11.10.0/24 via 10.11.20.2, Gi 3/21 120/1 00:01:14C 10.11.20.0/24 Direct, Gi 3/21 0/0 00:01:53C 10.11.30.0/24 Direct, Gi 3/11 0/0 00:06:00R 10.200.10.0/24 via 10.11.20.2, Gi 3/21 120/1 00:01:14R 10.300.10.0/24 via 10.11.20.2, Gi 3/21 120/1 00:01:14C 192.168.1.0/24 Direct, Gi 3/43 0/0 00:06:53C 192.168.2.0/24 Direct, Gi 3/44 0/0 00:06:26Core3#Core3#show ip protocolsRouting Protocol is "RIP"Sending updates every 30 seconds, next due in 6Invalid after 180 seconds, hold down 180, flushed after 240Output delay 8 milliseconds between packetsAutomatic network summarization is in effectOutgoing filter for all interfaces isIncoming filter for all interfaces isDefault redistribution metric is 1Default version control: receive version 2, send version 2Interface Recv SendGigabitEthernet 3/21 2 2GigabitEthernet 3/11 2 2GigabitEthernet 3/44 2 2GigabitEthernet 3/43 2 2Routing for Networks:10.11.20.010.11.30.0192.168.2.0192.168.1.0Routing Information Sources:Gateway Distance Last Update10.11.20.2 120 00:00:22Distance: (default is 120)Core3#
