3–Fibre Channel ConfigurationConfiguring End-to-End CS_CTL QoS91 CU0354604-00 P7. Set the QoS priority value for the vPort by moving the corresponding slider.8. Repeat Step 6 and Step 7 for each vPort whose priority you want to change.9. Click Save. Figure 3-38 shows an example.Figure 3-38. Changing vPort Priority using QConvergeConsole GUITo change the vPort priority level using interactive QConvergeConsole CLI:1. On the Main Menu, select Adapter Configuration.2. On the Adapter Type Selection menu, select QoS.3. On the QoS menu, select Adapter Port.4. On the Adapter Port menu, select QoS Priority.5. On the QoS Priority menu, select Modify QoS Settings.6. Choose the priority value for the vPorts.7. Select Apply QoS.Changing the Priority Levels in VMware ESXiTo change the priority levels using QConvergeConsole VMware vCenterServer Plug-in or QConvergeConsole VMware vSphere Web Client Plug-in:1. In the tree pane on the left, select a host.2. Expand the host in the left pane by clicking the plus sign (+).3. Locate and expand the 2600 Series Adapter whose priority levels you wantto change.4. Select a port in the 2600 Series Adapter.5. On the content pane on the right, click QoS.
