3–Fibre Channel ConfigurationUpdating the Dell Firmware32 CU0354604-00 PUpdating the Dell FirmwareThe firmware Dell Update Package (DUP) is a Flash update utility only; it is notused for adapter configuration. To run the firmware DUP, double-click theexecutable file. Alternatively, run the firmware DUP from the command line, whichsupports several command line options.Running the Firmware Update by Double-ClickingFor additional information, refer to the Dell Update Packages Version xx.xx.xxxUser’s Guide, “Using Dell Update Packages” section.To run the firmware DUP by double-clicking the executable file:1. Double-click the icon representing the firmware DUP file.NOTEFor information on configuring the Fibre Channel Adapter using VMwarevCenter Server, refer to the User’s Guide—QConvergeConsole Plug-ins forVMware vSphere (part number SN0054677-00), available at:www.marvell.com.NOTEIf you update the firmware using the DUP with the Integrated Dell RemoteAccess Controller (iDRAC) or Lifecycle Controller (LC), it shows FFV as theQLogic Fibre Channel adapter MBI version. This issue occurs only the firsttime that you run the firmware DUP; following a reboot, FFV will be showncorrectly on subsequent firmware updates with the DUP.
