4–NVM Express over Fibre ChannelHost Setup110 CU0354604-00 PWindows Host SetupTo set up a Windows host:1. Install the Windows FC driver from the Dell update package. Driver v9.3.2.20 or greater QConvergeConsole CLI v2.3.0.11 or greaterWindows Host NQNThe driver automatically generates a host NVMe qualified name (NQN). To viewthe host NQN, issue the qaucli -i command. Figure 4-1 shows an example.Figure 4-1. Viewing the Host NQNVerifying the Adapter FirmwareThe following sections describe how to verify and update adapter firmware.Verifying Adapter FirmwareConfirm that the adapter is running the minimum required firmware version,8.08.204 or later.To verify adapter firmware:1. In QConvergeConsole CLI, issue the following command:# qaucli -gHBA Model QLE2692 (SN AFD1517Y01945):Port 1 WWPN 21-00-00-24-FF-7B-97-60 (HBA instance 0) OnlinePort 2 WWPN 21-00-00-24-FF-7B-97-61 (HBA instance 1) OnlineNOTEThese procedures apply only to the FC-NVMe driver. For the Fibre Channeldriver, follow the instructions in the corresponding Readme.txt file.
