104 CU0354604-00 P4 NVM Express over FibreChannelThis chapter describes the installation and configuration of NVMe over FibreChannel (FC-NVMe) on the QLogic adapters from Marvell. It covers: Hardware and Software Requirements “Host Setup” on page 106 “Limitations and Known Issues” on page 113 “Unloading and Reloading the Linux Driver” on page 114For assistance with the installation and configuration of FC-NVMe, contact MarvellTechnical Support at this address:https://www.marvell.com/support/contact/cust_support.doHardware and Software RequirementsThe following sections list the required adapters, operating systems, and hostsoftware.AdaptersFC-NVMe requires one or more of the following adapters, including modelsQLE2690-DEL and QLE2692-DEL.Operating SystemsThe following x86_64 operating systems are supported for FC-NVMe: SUSE ® Linux Enterprise Server (SLES® ): SLES 12 SP4 SLES 15/15 SP1 Red Hat ® Enterprise Linux (RHEL): RHEL 7.6 RHEL 8.0
