3–Fibre Channel ConfigurationUsing Fast!UTIL for Custom Configuration37 CU0354604-00 P4. A message indicates that the configuration settings have been modified.Select Save changes.5. To load the new parameters, reboot the system.The Fast!UTIL Options menu provides the following options: Configuration Settings Scan Fibre Devices Fibre Disk Utility Loopback Data Test Select Adapter Exit Fast!UTILConfiguration SettingsThe following sections show and describe the 2600 Series AdaptersConfiguration Settings menu options in Fast!UTIL: Adapter Settings Selectable Boot Settings Restore Default Settings Raw NVRAM Data Advanced Adapter SettingsAdapter SettingsTable 3-1 describes the adapter settings.CAUTIONIf the configuration settings are incorrect, your 2600 Series Adapter may notfunction properly.Table 3-1. Adapter SettingsSetting Values Default DescriptionHost BusAdapter BIOSEnabled,DisabledDisabled Disabling this setting disables the ROM BIOS on the 2600Series Adapter, which frees space in upper memory. If youare booting from a Fibre Channel disk drive attached to the2600 Series Adapter, you must enable this setting. See“Selectable Boot Settings” on page 39 for details on specify-ing the boot device.
