2–Driver Installation and ConfigurationVMware Driver Installation and Configuration28 CU0354604-00 PTo uninstall the CIM Provider from a remote host:1. From a console on the host where the vSphere CLI package is installed orvMA is hosted, query and find the Bulletin ID of the existing provider:# vihostupdate.pl --query2. Remove the existing VIB by issuing the following command:# vihostupdate.pl --remove --bulletinInstalling the QConvergeConsole VMware vSphere WebClient Plug-inThis section includes the following information: Before You Begin Installing QConvergeConsole VMware vSphere Web Client Plug-in Uninstalling the QConvergeConsole VMware vSphere Web Client Plug-inBefore You BeginIt is advised to use this Plug-in for ESXi 6.5 and later.Gather the information necessary for the installation, including: IP address of the vCenter Server vCenter Server credentials (user name and password) Where to host the QConvergeConsole VMware vSphere Web Client Plug-in(on vCenter Server or other server)If you are hosting the QConvergeConsole VMware vSphere Web Client Plug-in ona non-vCenter Server, make sure the server has Tomcat running as a service andhave the IP address of the Tomcat instance ready. Also, make sure the TomcatCATALINA_HOME environment variable is set to the appropriate directory.NOTEBefore performing this procedure, make sure that the ESXi system is inMaintenance Mode. To do so using the vSphere Client, select Inventory,select Host, and then select Enter Maintenance Mode.NOTEFor more details on vihostupdate, see the vSphere Command-LineInterface Installation and Reference Guide, located here:http://www.vmware.com/pdf/vsphere4/r40/vsp_40_vcli.pdf
