3–Fibre Channel ConfigurationConfiguring the UEFI Driver56 CU0354604-00 PConfiguring the UEFI DriverThis section provides information on configuring the unified extensible firmwareinterface (UEFI) driver contained in the multiboot image. UEFI 2.x systems use ahuman interface infrastructure (HII) to configure motherboard devices and plug-inadapters. QLogic Fibre Channel Adapters use an HII to configure adapterparameters and boot-from-SAN settings.To configure the UEFI driver for Dell:1. During system boot, press the key corresponding to your platform.2. On the Dell System Setup window, select Device Settings, and then pressthe ENTER key.The Device Settings window opens and lists the devices installed in thesystem. Each listed device supports the HII. QLogic devices have onedevice settings entry per port. Each entry contains the adapter name andWWPN of the port. Figure 3-11 shows an example of the System Setupwindow for Device Settings.Figure 3-11. Dell System Setup: Device Settings
