100 Address Table Commandsbridge multicast forward-allThe bridge multicast forward-all Interface Configuration mode command enables forwarding of allMulticast packets on a port. To restore the default, use the no form of the bridge multicast forward-allcommand.Syntax• bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list}• no bridge multicast forward-all• add — Adds ports to the group.• remove — Removes ports from the group.• interface-list — Separate non consecutive valid Ethernet ports with a comma and no spaces; ahyphen is used to designate a range of ports.• port-channel-number-list — Separate non consecutive valid port-channels with a comma and nospaces; a hyphen is used to designate a range of port-channels.Default ConfigurationDisable forward-all on the specified interface.Command ModeInterface Configuration (VLAN) mode.User GuidelinesThere are no user guidelines for this command.ExampleIn this example all Multicast packets on port g8 are forwarded.bridge multicast forbidden forward-allThe bridge multicast forbidden forward-all Interface Configuration mode command forbids a port to bea forward-all-Multicast port. To restore the default, use the no form of the bridge multicast forward-allcommand.Console (config)# interface vlan 2Console (config-if)# bridge multicast forward-all add ethernetg85400_CLI.book Page 100 Wednesday, December 17, 2008 4:33 PM
