Dell PowerConnect 5424 Command Line Interface Manual

Also see for PowerConnect 5424: User guide Getting started guide User guide

Contents

Dell PowerConnect 5424 Command Line Interface Manual Manual pdf 332 page image

332 SNMP CommandsExamplesThe following example displays the command to enable SNMP traps.snmp-server trap authenticationThe snmp-server trap authentication Global Configuration mode command enables the switch to sendSimple Network Management Protocol traps when authentication fails. Use the no form of thiscommand to disable SNMP authentication failed traps.Syntax• snmp-server trap authentication• no snmp-server trap authenticationDefault ConfigurationThis command has no default configuration.Command ModeGlobal Configuration mode.User Guidelines• There are no user guidelines for this command.ExamplesThe following example displays the command to enable authentication failed SNMP traps.snmp-server hostThe snmp-server host Global Configuration mode command specifies the recipient of Simple NetworkManagement Protocol notification operation. Use the no form of this command to remove the specifiedhost.Console (config)# snmp-server enable trapsConsole (config)# snmp-server trap authentication5400_CLI.book Page 332 Wednesday, December 17, 2008 4:33 PM