Clock 131sntp client enableThe sntp client enable Global Configuration mode command enables the Simple Network TimeProtocol (SNTP) Broadcast and Anycast client on an interface. Use the no form of this command todisable the SNTP client.Syntax• sntp client enable {ethernet interface-number | vlan vlan-id | port-channel number}• no sntp client enable {ethernet interface-number | vlan vlan-id | port-channel number}• ethernet interface-number — Ethernet port number.• vlan vlan-id — Vlan number.• port-channel number — Port channel number.Default ConfigurationThe SNTP clienit is disabled.Command ModeGlobal Configuration mode.User Guidelines• Use the sntp Broadcast client enable Global Configuration mode command to enable Broadcastclients globally.• Use the sntp anycast client enable Global Configuration mode command to enable Anycast clientsglobally.ExamplesThe following example enables the SNTP client on the interface.sntp client enable (interface)The sntp client enable Interface Configuration mode command enables the Simple Network TimeProtocol (SNTP) client on an interface. This applies to both receive Broadcast and Unicast updates.Use the no form of this command to disable the SNTP client.Syntax• sntp client enable• no sntp client enableThis command has no arguments or keywords.Console (config)# sntp client enable5400_CLI.book Page 131 Wednesday, December 17, 2008 4:33 PM
