50 Command GroupsSNMP Commandsshow rmon events Displays the RMON event table. User EXECshow rmon log Displays the RMON logging table. User EXECrmon table-size Configures the maximum RMON tables sizes. GlobalConfigurationCommand Group Description Access Modesnmp-server community the community access string to permit access to SNMPprotocol.GlobalConfigurationsnmp-server view Creates or update a view entry, GlobalConfigurationsnmp-server contact Sets up a system contact. GlobalConfigurationsnmp-server location Sets up the information on where the device is located. GlobalConfigurationsnmp-server enable traps Enables the switch to send SNMP traps or SNMPnotifications.GlobalConfigurationsnmp-server trapauthenticationEnables the switch to send Simple NetworkManagement Protocol traps when authentication failed.GlobalConfigurationsnmp-server host Specifies the recipient of Simple Network ManagementProtocol notification operation,GlobalConfigurationsnmp-server set Sets SNMP MIB value by the CLI. GlobalConfigurationsnmp-server group Configures a new Simple Network Management Protocol(SNMP) group, or a table that mapsSNMP users to SNMP views.GlobalConfigurationsnmp-server user Configure a new SNMP Version 3 user. GlobalConfigurationsnmp-server v3-host Specifies the recipient of SimpleNetwork Management Protocol Version 3 notifications.GlobalConfigurationsnmp-server engineID local Specifies the Simple Network Management Protocol(SNMP) engineID on the local device.GlobalConfigurationshow snmp engineid Displays the ID of the local Simple Network ManagementProtocol (SNMP) enginePrivileged UserEXECshow snmp Displays the SNMP status. Privileged UserEXEC5400_CLI.book Page 50 Wednesday, December 17, 2008 4:33 PM
