Dell PowerConnect 5424 Command Line Interface Manual

Also see for PowerConnect 5424: User guide Getting started guide User guide

Contents

Dell PowerConnect 5424 Command Line Interface Manual Manual pdf 258 page image

258 LLDP CommandsUser GuidelinesThere are no user guidelines for this command.ExampleThe following example specifies which optional TLV (2)s from the basic set should be transmitted.lldp management-addressThe lldp management-address Interface Configuration mode command specifies the managementaddress that would be advertised from an interface. Use the no form of this command to stop advertisingmanagement address information.Syntax• lldp management-address ip-address• no management-address• ip-address — Specifies the management address to advertise.Default ConfigurationNo IP address is advertised.Command ModesInterface Configuration (Ethernet) mode.User Guidelines• Each port can advertise one IP address.• Only static IP addresses can be advertised.ExampleThe following example specifies management address that would be advertised from an interface as192.168.0.1.Console(config)# interface ethernet g5Console(config-if)# lldp optional-tlv sys-nameConsole(config)# interface ethernet g5Console(config-if)# lldp management-address 192.168.0.15400_CLI.book Page 258 Wednesday, December 17, 2008 4:33 PM