Command Groups 49RADIUS CommandsRMON CommandsCommand Group Description Access Moderadius-server host Specifies a RADIUS server host. GlobalConfigurationradius-server key Sets the authentication and encryption key for all RADIUScommunications between the router and the RADIUSdaemon.GlobalConfigurationradius-server retransmit Specifies the number of times the software searches the listof RADIUS server hosts.GlobalConfigurationradius-server source-ip Specifies the source IP address used for communicationwith RADIUS servers.GlobalConfigurationradius-server source-ipv6 Specifies the source IPv6 address used for the IPv6communication with RADIUS servers.GlobalConfigurationradius-server timeout Sets the interval for which a router waits for a server host toreply.GlobalConfigurationradius-server deadtime Improves RADIUS response times when servers areunavailable.GlobalConfigurationshow radius-servers Displays the RADIUS server settings. Privileged UserEXECCommand Group Description Modeshow rmon statistics Displays RMON Ethernet Statistics. User EXECrmon collection history Enables a Remote Monitoring (RMON) MIB historystatistics group on an interface.InterfaceConfiguration(Ethernet, port-channel)sshow rmon collectionhistoryDisplays the requested history group configuration. User EXECshow rmon history Displays RMON Ethernet Statistics history. User EXECrmon alarm Configures alarm conditions. GlobalConfigurationshow rmon alarm-table Displays the alarms summary table. User EXECshow rmon alarm Displays alarm configurations. User EXECrmon event Configures a RMON event. GlobalConfiguration5400_CLI.book Page 49 Wednesday, December 17, 2008 4:33 PM
