1094 BigIron RX Series Configuration Guide53-1001810-01Displaying global IPv6 information43Clearing IPv6 traffic statisticsTo clear all IPv6 traffic statistics (reset all fields to zero), enter the following command at thePrivileged EXEC level or any of the Config levels of the CLI.BigIron RX(config)# clear ipv6 trafficSyntax: clear ipv6 trafficDeleting IPv6 session flowsTo delete all flows from the IPv6 session cache, enter the following command.BigIron RX# clear ipv6 flowsSyntax: clear ipv6 flowsDisplaying global IPv6 informationYou can display output for the following global IPv6 parameters:• IPv6 cache.• IPv6 interfaces.• IPv6 neighbors.• IPv6 route table.• Local IPv6 routers.• IPv6 TCP connections and the status of individual connections.• IPv6 traffic statistics.• IPv6 session flowsDisplaying IPv6 cache informationThe IPv6 cache contains an IPv6 host table that has indices to the next hop gateway and the routerinterface on which the route was learned.To display IPv6 cache information, enter the following command at any CLI level:Syntax: show ipv6 cache [<index-number> | <ipv6-prefix>/<prefix-length> | <ipv6-address> |ethernet <port> | ve <number> | tunnel <number>]BigIron RX# show ipv6 cacheTotal number of cache entries: 10IPv6 Address Next Hop Port1 5000:2::2 LOCAL tunnel 22 2000:4::106 LOCAL ethe 3/23 2000:4::110 DIRECT ethe 3/24 2002:c0a8:46a::1 LOCAL ethe 3/25 fe80::2e0:52ff:fe99:9737 LOCAL ethe 3/26 fe80::ffff:ffff:feff:ffff LOCAL loopback 27 fe80::c0a8:46a LOCAL tunnel 28 fe80::c0a8:46a LOCAL tunnel 69 2999::1 LOCAL loopback 210 fe80::2e0:52ff:fe99:9700 LOCAL ethe 3/1
