BigIron RX Series Configuration Guide 125753-1001810-01IPv6 PIM sparse 49To display the hardware resource information such as hardware allocation, availability, and limit forsoftware data structure, enter the following command.BigIron RX>show ipv6 pim trafficPort Hello J/P Register RegStop Assert[Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx]MLD Statistics:Total Recv/Xmit 0/0Total Discard/chksum 0/0This display shows the following information.Displaying PIM traffic statisticsTo display IPv6 PIM traffic statistics, enter the following command at any CLI level.BigIron RX#show ipv6 pim trafficPort Hello Join Prune Assert[Rx Tx] [Rx Tx] [Rx Tx] [Rx Tx]MLD Statistics:Total Recv/Xmit 356/161Total Discard/chksum 0/0BigIron RX#Syntax: show ipv6 pim trafficThis display shows the following information.TABLE 219 Output of Show IPvG PIM resourceThis field... Displays...alloc Number of nodes of that data that are currently allocated in memory.in-use Number of allocated nodes in useavail Number of allocated nodes are not in useallo-fail Number of allocated notes that failedup-limit Maximum number of nodes that can be allocated for a data structure. This mayor may not be configurable, depending on the data structureThis field... Displays...Port The port or virtual interface on which the IPv6 PIM interface is configured.Hello The number of IPv6 PIM Hello messages sent or received on the interface.J/P The number of Join/Prune messages sent or received on the interface.NOTE: Unlike PIM dense, PIM Sparse uses the same messages for Joins andPrunes.Register The number of Register messages sent or received on the interface.RegStop The number of Register Stop messages sent or received on the interface.Assert The number of Assert messages sent or received on the interface.Total Recv/Xmit The total number of IGMP messages sent and received by the BigIron RX.Total Discard/chksum The total number of IGMP messages discarded, including a separate counter forthose that failed the checksum comparison.
