BigIron RX Series Configuration Guide 84953-1001810-01Displaying BGP4 information 26You also can display all the dampened routes by entering the following command.show ip bgp dampened-paths.Displaying the active route map configurationYou can view the device’s active route map configuration (contained in the running configuration)without displaying the entire running configuration.To display the device’s active route map configuration, enter the following command at any level ofthe CLI.BigIron RX# show route-maproute-map permitnet4 permit 10match ip address prefix-list plist1route-map permitnet1 permit 1match ip address prefix-list plist2route-map setcomm permit 1set community 1234:2345 no-exportroute-map test111 permit 111match address-filters 11set community 11:12 no-exportroute-map permit1122 permit 12match ip address 11route-map permit1122 permit 13match ip address std_22This example shows that the running configuration contains six route maps. Notice that the matchand set statements within each route map are listed beneath the command for the route mapitself. In this simplified example, each route map contains only one match or set statement.To display the active configuration for a specific route map, enter a command such as the following,which specifies a route map name.BigIron RX# show route-map setcommroute-map setcomm permit 1set community 1234:2345 no-exportThis example shows the active configuration for a route map called “setcomm“.Syntax: show route-map []Graceful restart in BGPUnder normal operation, restarting a BGP router causes the network to be reconfigured. In thissituation, routes available through the restarting router are first deleted when the router goes downand are then rediscovered and re-added to the routing tables when the router is back up andrunning. In a network where routers are restarted regularly, this can degrade performanceReuse The amount of time remaining until this route will be un-suppressed andthus be usable again.Path Shows the AS-path information for the route.TABLE 127 Route flap dampening statisticsThis field... Displays...
