BigIron RX Series Configuration Guide 63953-1001810-01Configuring MSDP mesh groups 23Displaying peer informationTo display MSDP peer information, use the following CLI method.Syntax: show ip msdp peerThis display shows the following information.TABLE 102 MSDP peer informationThis field... Displays...Total number of MSDP peers The number of MSDP peers configured on the deviceIP Address The IP address of the peer’s interface with the deviceState The state of the MSDP router’s connection with the peer. The statecan be one of the following:• CONNECTING – The session is in the active open state.• ESTABLISHED – The MSDP session is fully up.• INACTIVE – The session is idle.• LISTENING – The session is in the passive open state.Keep Alive Time The keep alive time, which specifies how often this MSDP routersends keep alive messages to the neighbor. The keep alive time is60 seconds and is not configurable.Hold Time The hold time, which specifies how many seconds the MSDP routerwill wait for a KEEPALIVE or UPDATE message from an MSDPneighbor before deciding that the neighbor is dead. The hold time is90 seconds and is not configurable.Keep Alive Message Sent The number of Keep Alive messages the MSDP router has sent tothe peer.BigIron RX# show ip msdp peerTotal number of MSDP Peers: 2IP Address State1 206.251.17.30 ESTABLISHEDKeep Alive Time Hold Time60 90Message Sent Message ReceivedKeep Alive 2 3Notifications 0 0Source-Active 0 640Last Connection Reset Reason:Reason UnknownNotification Message Error Code Received:UnspecifiedNotification Message Error SubCode Received:Not ApplicableNotification Message Error Code Transmitted:UnspecifiedNotification Message Error SubCode Transmitted:Not ApplicableTCP Connection state: ESTABLISHEDLocal host: 206.251.17.29, Local Port: 8270Remote host: 206.251.17.30, Remote Port: 639ISentSeq: 16927 SendNext: 685654 TotUnAck: 0SendWnd: 16384 TotSent: 668727 ReTrans: 1IRcvSeq: 45252428 RcvNext: 45252438 RcvWnd: 16384TotalRcv: 10 RcvQue: 0 SendQue: 0
