Dell PowerEdge M I/O Aggregator Reference Manual

Also see for PowerEdge M IO Aggregator: Command reference guide Getting started guide

Contents

100 | Data Center Bridgingw w w . d e l l . c o m | s u p p o r t . d e l l . c o m UsageInformationTable 7-2 lists the show interface ets summary field descriptions.Table 7-2. show interfaces ets detail Command Example FieldsField DescriptionInterface Interface type with stack-unit and port number.Max Supported TC Group Maximum number of priority groups supported.Number of Traffic Classes Number of 802.1p priorities currently configured.Admin mode ETS mode: on or off.When on, the scheduling and bandwidth allocation configured in an ETS outputpolicy or received in a DCBX TLV from a peer can take effect on an interface.Admin Parameters ETS configuration on local port, including priority groups, assigned dot1ppriorities, and bandwidth allocation.Remote Parameters ETS configuration on remote peer port, including admin mode (enabled if a validTLV was received or disabled), priority groups, assigned dot1p priorities, andbandwidth allocation. If ETS admin mode is enabled on the remote port for DCBXexchange, the Willing bit received in ETS TLVs from the remote peer is included.Local Parameters ETS configuration on local port, including admin mode (enabled when a valid TLVis received from a peer), priority groups, assigned dot1p priorities, and bandwidthallocation.Operational status (localport)Port state for current operational ETS configuration:• Init: Local ETS configuration parameters were exchanged with the peer.• Recommend: Remote ETS configuration parameters were received from thepeer.• Internally propagated: ETS configuration parameters were received fromthe configuration source.ETS DCBX Oper status Operational status of the ETS configuration on the local port: match or mismatch.State Machine Type Type of state machine used for DCBX exchanges of ETS parameters:Feature - for legacy DCBX versions; Asymmetric - for an IEEE version.Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled or disabled.Reco TLV Tx Status Status of ETS Recommendation TLV advertisements: enabled or disabledETS TLV Statistic: InputConf TLV pktsNumber of ETS Configuration TLVs received.ETS TLV Statistic:Output Conf TLV pktsNumber of ETS Configuration TLVs transmitted.ETS TLV Statistic: ErrorConf TLV pktsNumber of ETS Error Configuration TLVs received.ETS Reco TLV Statistic:Input Reco TLV pktsNumber of ETS Recommendation TLVs received.ETS Reco TLV Statistic:Output Reco TLV pktsNumber of ETS Recommendation TLVs transmitted.ETS Reco TLV Statistic:Error Reco TLV pktsNumber of ETS Error Recommendation TLVs received.