154 | Interfacesw w w . d e l l . c o m | s u p p o r t . d e l l . c o m RelatedCommandsshow vlan Displays the current VLAN configurations on the switch.Syntax show vlan [brief | id vlan-id | name vlan-name]ParametersCommand Modes EXECEXEC PrivilegeCommandHistoryExample Figure 11-30. show vlan Command Examplevlan tagged Runs the TDR test.brief (OPTIONAL) Enter the keyword brief to display the following information:• VLAN ID• VLAN name (left blank if none is configured.)• Spanning Tree Group ID• MAC address aging time• IP addressid vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Onlyinformation on the VLAN specified is displayed.namevlan-name(OPTIONAL) Enter the keyword name followed by the name configured for the VLAN.Only information on the VLAN named is displayed.Version 8.3.17.0 Supported on M I/O AggregatorTable 11-10. show vlan Command InformationColumn Heading Description(Column 1 — no heading) asterisk symbol (*) = Default VLANG = GVRP VLANP = primary VLANC = community VLANI = isolated VLANNUM Displays existing VLAN IDs.FTOS#show vlanCodes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -Primary, C - Community, I - IsolatedQ: U - Untagged, T - Taggedx - Dot1x untagged, X - Dot1x taggedG - GVRP tagged, M - Vlan-stack, H - VSN taggedi - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT taggedNUM Status Description Q Ports1 Inactive a2 Inactive* 20 Active U Te 0/3,5,13,53-561002 Active T Te 0/3,13,55-56FTOS#
