File Management | 33ParametersDefaults noneCommand Modes EXEC PrivilegeCommandHistoryUsageInformationExample Figure 4-12. show os-version Command Exampleshow running-configDisplays the current configuration and changes from the default values.Syntax show running-config [entity] [configured] [status]Parametersfile-url (OPTIONAL) Enter the following location keywords and information:• For a file on the internal Flash, enter flash:// followed by the filename.• For a file on an FTP server, enter ftp://user:password@hostip/filepath• For a file on a TFTP server, enter tftp://hostip/filepath• For a file on the external Flash, enter usbflash:// followed by the filename.Version 8.3.17.0 Supported on M I/O AggregatorNote: A filepath that contains a dot (.) is not supported.FTOS#show os-versionRELEASE IMAGE INFORMATION :---------------------------------------------------------------------Platform Version Size ReleaseTimeIOM-Series: XL 8-3-17-38 31603078 Jul 19 2012 06:02:28TARGET IMAGE INFORMATION :---------------------------------------------------------------------Type Version Target checksumruntime 8-3-17-38 Control Processor passedCPLD IMAGE INFORMATION :---------------------------------------------------------------------Card CPLD Name VersionStack-unit 1 IOM SYSTEM CPLD 6FTOS#entity (OPTIONAL) Enter one of the keywords listed below to display that entity’scurrent (non-default) configuration. Note that, if nothing is configured forthat entity, nothing is displayed and the prompt returns:• boot for the current boot configuration• ftp for the current FTP configuration• igmp for the current IGMP configuration• interface for the current interface configuration• iscsi for the current ISCSI configuration• line for the current line configuration• lldp for the current LLDP configuration• logging for the current logging configuration
