Dell PowerEdge M I/O Aggregator Reference Manual

Also see for PowerEdge M IO Aggregator: Command reference guide Getting started guide

Contents

222 | Stacking Commandsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m CommandHistoryUsageInformationThis command is used to reset the stack-unit. The master unit can also be power cycled using thiscommand.reset stack-unitReset any designated stack member except the management unit (master unit).Syntax reset stack-unit 0-5 hardParametersDefault noneCommand Modes EXEC PrivilegeCommandHistoryUsageInformationResetting the management unit is not allowed (an error message is displayed if you try to do so).Resetting is a soft reboot, including flushing the forwarding tables.You can run this command directly on the stack standby unit (Standby Master) to reset the standby.You cannot reset any other unit from the standby unit.Example Figure 21-1. reset stack-unit Command Example on the Stack Standby UnitVersion 8.3.17.0 Supported on M I/O Aggregator0-5 Enter the stack member unit identifier of the stack member to reset.hard Reset the stack unit if the unit is in a problem state.Version 8.3.17.0 Supported on M I/O AggregatorFTOS#show system briefStack MAC : 00:1e:c9:f1:00:9b-- Stack Info --Unit UnitType Status ReqTyp CurTyp Version Ports------------------------------------------------------------------------------------0 Management online I/O-Aggregator I/O-Aggregator 8-3-17-46 561 Standby online I/O-Aggregator I/O-Aggregator 8-3-17-46 562 Member not present3 Member not present4 Member not present5 Member not presentFTOS#FTOS#reset stack-unit 0 <% Error: Reset of master unit is not allowed.FTOS#FTOS#reset stack-unit 1FTOS#01:02:00: %STKUNIT0-M:CP %CHMGR-5-STACKUNIT_RESET: Stack unit 1 being reset01:02:00: %STKUNIT0-M:CP %IFMGR-1-DEL_PORT: Removed port: Te 1/1-32,41-5601:02:00: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 1 down - reset01:02:00: %STKUNIT1-S:CP %IFMGR-1-DEL_PORT: Removed port: Te 1/1-32,41-5601:02:05: %I/O-Aggregator:0 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack portstate to down: 0/3701:02:11: %STKUNIT0-M:CP %POLLMGR-2-ALT_STACK_UNIT_STATE: Alternate Stack-unit isnot presentFTOS#01:02:12: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 1 down - cardremoved