190 | Link Layer Discovery Protocol (LLDP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o m ParametersDefaults noneCommand Modes EXEC PrivilegeCommandHistorydebug lldp interfaceEnable LLDP debugging to display timer events, neighbor additions or deletions, and otherinformation about incoming and outgoing packets.Syntax debug lldp interface {interface | all}{events | packet {brief | detail} {tx | rx | both}}To disable debugging, use the no debug lldp interface {interface | all}{events} {packet {brief |detail} {tx | rx | both}} command.ParametersDefaults noneCommand Modes EXEC PrivilegeCommandHistoryinterface Enter the following keywords and slot/port or number information:• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernetfollowed by the slot/port information.Version 8.3.17.0 Supported on M I/O Aggregatorinterface Enter the following keywords and slot/port or number information:• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernetfollowed by the slot/port information.all (OPTIONAL) Enter the keyword all to display information on all interfaces.events (OPTIONAL) Enter the keyword events to display major events such as timerevents.packet (OPTIONAL) Enter the keyword packet to display information regarding packetscoming in or going out.brief (OPTIONAL) Enter the keyword brief to display brief packet information.detail (OPTIONAL) Enter the keyword detail to display detailed packet information.tx (OPTIONAL) Enter the keyword tx to display transmit only packet information.rx (OPTIONAL) Enter the keyword rx to display receive only packet informationboth (OPTIONAL) Enter the keyword both to display both receive and transmit packetinformation.Version 8.3.17.0 Supported on M I/O Aggregator