Data Center Bridging | 97show interface etsDisplays the ETS configuration applied to egress traffic on an interface, including priority groups withpriorities and bandwidth allocation.Syntax show interface port-type slot/port ets {summary | detail}ParametersCommand Mode EXEC PrivilegeCommandHistoryLocal DCBX Status:Protocol StateCurrent operational state of the DCBX protocol: Waiting for ACK or IN-SYNC.Peer DCBX Status:DCBX OperationalVersionDCBX version advertised in Control TLVs received from the peer device.Peer DCBX Status:DCBX Max VersionSupportedHighest DCBX version supported in Control TLVs received from the peer device.Peer DCBX Status:Sequence NumberSequence number transmitted in Control TLVs received from the peer device.Peer DCBX Status:AcknowledgmentNumberAcknowledgement number transmitted in Control TLVs received from the peerdevice.Total DCBX FramestransmittedNumber of DCBX frames sent from the local port.Total DCBX FramesreceivedNumber of DCBX frames received from the remote peer port.Total DCBX Frame errors Number of DCBX frames with errors received.Total DCBX FramesunrecognizedNumber of unrecognizable DCBX frames received.Table 7-1. show interface dcbx detail Command Example Fields (continued)Field Descriptionport-type slot/portetsEnter the port-type slot and port ETS information.{summary | detail} Enter the keyword summary for a summary list of results or enter the keyword detailfor a full list of results.Version 8.3.17.0 Supported on M I/O Aggregator