Data Center Bridging | 91CommandHistoryExample 1 Figure 7-1. Disable DCB Command ExampleVersion 8.3.17.4 Added auto-detect parameter.Version 8.3.17.0 Supported on M I/O AggregatorFTOS#show dcb stack-unit 0 port-set 0stack-unit 0 port-set 0DCB Status : EnabledPFC Port Count : 56 (current), 0 (configured)PFC Queue Count : 2 (current), 0 (configured)FTOS#FTOS#confFTOS(conf)#dcb enable ?on-next-reload Apply DCB configs on subsequent reloadFTOS(conf)#no dcb enable on-next-reloadFTOS(conf)#00:03:11: %STKUNIT0-M:CP %DIFFSERV-6-DCB_DISABLE_CFG_ON_RELOAD:Global DCB will be disabled on subsequent reload, All reserved PFC buffers willbe deleted from each stack unit. For the pfc-buffering change to take effect,please save the config and reload the system.FTOS(conf)#endFTOS#00:03:23: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from consoleFTOS#write memory00:03:28: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config tostartup-config in flash by defaultFTOS#reloadProceed with reload [confirm yes/no]: yes00:04:13: %STKUNIT0-M:CP %CHMGR-5-RELOAD: User request to reload the chassissyncing disks... doneunmounting file systems...unmounting /f10/flash (/dev/ld0e)...unmounting /usr (mfs:31)...unmounting /lib (mfs:23)...unmounting /f10 (mfs:20)...unmounting /tmp (mfs:15)...unmounting /kern (kernfs)...unmounting / (/dev/md0a)... donerebooting...FTOS#FTOS#show dcb stack-unit 0 port-set 0stack-unit 0 port-set 0DCB Status : DisabledPFC Port Count : 0 (current), 0 (configured)PFC Queue Count : 0 (current), 0 (configured)FTOS#
