76 | Control and Monitoringw w w . d e l l . c o m | s u p p o r t . d e l l . c o m Example Figure 5-33. traceroute (IPv4) Command ExampleRelatedCommandsundebug allDisable all debug operations on the system.Syntax undebug allDefaults noneCommand Modes EXEC PrivilegeCommandHistorywrite Copy the current configuration to either the startup-configuration file or the terminal.Syntax write {memory | terminal}ParametersCommand Modes EXEC PrivilegeFTOS#traceroute www.force10networks.comTranslating "www.force10networks.com"...domain server (10.11.0.1) [OK]Type Ctrl-C to abort.------------------------------------------------------------------------------------------Tracing the route to www.force10networks.com (10.11.84.18), 30 hops max, 40 bytepackets------------------------------------------------------------------------------------------TTL Hostname Probe1 Probe2 Probe31 10.11.199.190 001.000 ms 001.000 ms 002.000 ms2 gwegress-sjc-02.force10networks.com (10.11.30.126) 005.000 ms 001.000 ms001.000 ms3 fw-sjc-01.force10networks.com (10.11.127.254) 000.000 ms 000.000 ms 000.000ms4 www.force10networks.com (10.11.84.18) 000.000 ms 000.000 ms 000.000 msFTOS#ping Tests the connectivity to a device.Version 8.3.17.0 Supported on M I/O Aggregatormemory Enter the keyword memory to copy the current running configuration to the startupconfiguration file. This command is similar to the copy running-config startup-configcommand.terminal Enter the keyword terminal to copy the current running configuration to the terminal. Thiscommand is similar to the show running-config command.
