4–Switch Independent PartitioningSwitch Independent Partitioning Setup and Management Options153 CU0354602-00 LThe Security Check dialog box might appear. In the Enter Password box,type the password and then click OK.View eSwitch ConfigurationQConvergeConsole appears and lets you view the current eSwitch offloadsettings. The eSwitch configuration is not persistent across reboots and driverreloads; however, you can save the configuration before the reboot/reload andrestore it at a later time.To view the eSwitch configuration:1. Expand a QLogic adapter node in the QConvergeConsole system tree.2. Expand the physical port 1 node and select the NIC port. The content panedisplays tabs that are not available on NIC ports for physical port 2.3. Select the NIC Partitioning tab.4. Select the eSwitch subtab.The NIC Partitioning eSwitch Management page displays offloadconfiguration settings that apply to the selected port (see Figure 4-17).Figure 4-17. NIC Partitioning—eSwitch Management Page5. Select the port for which you want to set the offload properties from thedrop-down menu.The listed offload fields apply to the selected port.NOTEThe settings are persistent across reboots.
