5–Boot ConfigurationiBFT Boot Setup214 CU0354602-00 LiBFT Boot SetupFor an alternate method of iSCSI boot from SAN, use the fields in the iBFT. iBFTis a component of the Advanced Configuration and Power Interface Specification3.0b standard that provides operating systems a standard way to boot fromsoftware-initiated iSCSI protocol. To view the iBFT specification, visit the followingURL:http://www.microsoft.com/whdc/system/platform/firmware/ibft.mspxThis section provides details for setting up the adapter using iBFT, including: Enabling iBFT Boot Booting to a Target DiskEnabling iBFT BootFollow these steps to enable iBFT boot in the Dell BIOS system.1. Boot the server, and when the NIC boot code banner appears, pressCTRL+Q.The QLogic CNA Function Configuration utility opens, as shown inFigure 5-31.Figure 5-31. CNA Configuration Utility
