3–Adapter Management ApplicationsGeneral Management with QConvergeConsole53 CU0354602-00 LExample:$qaucli -pr iscsi -chOr:$qaucli -iscsi -ch*** hba instance: 0HBA_Alias : QLogic QLE8262*** hba instance: 1HBA_Alias : QLogic QLE8262Modifying Adapter-Level iSCSI ParametersUse the -nh command to set the adapter-level parameters for single- or multi-portadapters. The positional parameter becomes and a series ofone or more parameter name-value pairs. To check the list of parameters, use the-ch option.Command line options:-nh [ ]Example:$qaucli -pr iscsi -nh HBA_ALIAS "AccountingHBA"Or:$qaucli -iscsi -nh HBA_ALIAS "AccountingHBA"HBA (adapter) Parameters:The following table lists the parameters that may be configured usingthe -nh option in non-interactive mode.Full Parameter Name Alias Name Allowable Values------------------- ---------- ----------------HBA_Alias HBAALIAS Character stringPort-Level iSCSI ParametersThis section shows the commands used to display and to modify port-level iSCSIparameters.Displaying Port-Level iSCSI ParametersUse the -c command to view port configured settings. The positional parameter,[hba_port_inst], is optional. If the hba_port_inst is specified, onlyinformation for that port is shown. If the hba_port_inst is not specified,information on all ports in the system is shown.
