2–Driver Installation and ConfigurationVMware Driver Installation and Configuration44 CU0354602-00 LUninstalling the QConvergeConsole VMware vCenter Server Plug-inTo remove the QConvergeConsole VMware vCenter Server Plug-in:1. In the Windows Control Panel, select Add or Remove Programs.(Windows Server 2008 or later only: select Programs and Features.)2. In the Add or Remove Programs dialog box, select the QConvergeConsoleVMware vCenter Server Plug-in and then click Change/Remove.3. Follow the instructions in the QConvergeConsole VMware vCenter ServerPlug-in installer to remove the plug-in.Installing the QLogic Adapter CIM ProviderThis section describes how to install, start, and remove the QLogic Adapter CIMProvider for VMware ESX and ESXi. There is more than one zip package, somake sure that you pick the zip package that matches yourenvironment—ESXi 5.0, and ESXi 5.1.Initial Installation MethodsInitial installation methods for the CIM Provider include the following: OnlineRefer to “Installing the CIM Provider on an ESXi 5.x Host” on page 45 or“Installing the CIM Provider on an ESXi 5.5 Host” on page 45. OfflineRefer to “Existing ESX/ESXi Installation Using VMware Update Manager” onpage 45. RemoteRefer to “Remote Installation of the CIM Provider on an ESX/ESXi Host” onpage 46.NOTEThe QLogic Adapter CIM Provider for VMware ESX was generated as a VIBfile. A VIB contains the complete set of files and binaries required to installthe provider on VMware ESX/ESXi. The offline-bundle.zip filecontains the VIB and the necessary metadata to install the provider onVMware ESX/ESXi.
