5–Boot ConfigurationiSCSI Configuration Using Fast!UTIL213 CU0354602-00 L13. In the pop-up window, use the UP ARROW and DOWN ARROW or the +and – buttons to move the iSCSI target to the top of the list, as shown inFigure 5-30 (where the iSCSI target is configured on Port 1, Partition 3).Then click OK.Figure 5-30. Setting the iSCSI Boot Sequence14. Select Save changes and exit.15. Follow the manufacturer’s OS installation instructions.BootingThe iSCSI Fast!UTIL BIOS includes an iSCSI Boot Settings option, which isaccessed from the Configuration Settings menu. When you enable this option,you can specify the drive from which you want to boot. After this is enabled, theoption forces the system to boot from the selected iSCSI drive, subject to thesettings in system BIOS (QLogic BIOS does not override system BIOS). Whenyou disable this option, the system looks for a boot device (as selected in thesystem BIOS).
