5–Boot ConfigurationPXE Boot Setup199 CU0354602-00 LPXE Boot SetupThe PXE allows a workstation to boot from a server on a network before bootingthe operating system on the local hard drive.Configuring PXE BootThis section provides procedures for configuring the ProductLine to perform PXEboot. The example uses function 1 and NIC 1.To configure PXE boot:1. During POST, press the CTRL+Q keys to enter the QLogic 8200 SeriesCNA Function Configuration window.2. On the CNA Function Configuration main window, ensure that Protocol isset to PXE (Figure 5-20).Figure 5-20. QLogic 82xx CNA Function Configuration3. Press the ESC key to exit.4. Select Save changes to save your edits, exit, and reboot the system.5. During POST, press the F1 or F2 key to enter the BIOS system.6. Select Boot Settings, and then press ENTER.7. Select the Boot Sequence option, and then press ENTER.8. Select the QLogic PXE entry as the first boot option.
