Denon AVR-2105 Operating Instructions Manual

Also see for AVR-2105: Operating instructions Specifications Operating instructions Service manual Operating instructions

27ENGLISH5 Select the optimum mode for the source.SELECT(Main unit) (Remote control unit)6 Select the various parameters. (See “Surround parameters q” for a description of the variousparameters.)SURROUNDPARAMETER(Main unit) (Remote control unit)7 Set the various surround parameters.SELECT(Main unit) (Remote control unit)8 When the surround parameters are set using the buttons on the main unit, stop operating buttons aftercompleting the settings. The settings are automatically finalized and the normal display reappears afterseveral seconds.9 Press the ENTER button to finish surround parametermode.(Remote control unit)NOTE:• When making parameter settings, the display will return to the regular condition several seconds after thelast button was pressed and the setting will be completed.5, 74, 61 24, 65, 7195, 7266DTS NEO:6 mode1 Select the function to which the componentyou want to play is connected.FUNCTION(Main unit) (Remote control unit)2 Select the DTS NEO:6 mode.STANDARD(Main unit) (Remote control unit)3 Play a program source.• The mode switches as shown below eachtime the button is pressed.DOLBY PLIIx DTS NEO:6The DTS NEO:6 Cinema orMusic mode can be chosendirectly by pressing theCINEMA or MUSIC buttonon the remote control unitduring playback in the DTSNEO:6 mode.4 Select the surround parameter mode.SURROUNDPARAMETERMODE cinemaDisplay(Main unit) (Remote control unit)To perform this operation from the remotecontrol unit, check that the mode selectorswitch is set to “AUDIO”.• When the “SB CH OUT” parameter is set to “ON”. (Set“S.BackSp” at system set up to “SMALL” or“LARGE”.)(Pro Logic IIxCinema mode)(Pro Logic IIxMusic mode)(Pro Logic IIxGame mode)or or• When the “SB CH OUT” parameter is set to “OFF”. (Set“S.BackSp” at system set up to “NONE””.)(Pro Logic IICinema mode)(Pro Logic IIMusic mode)(Pro Logic IIGame mode)or or(Dolby Pro Logicmode)Example: DVD5 Select the optimum mode for the source.SELECT(Main unit) (Remote control unit)6 Select the various parameters.SURROUNDPARAMETER(Main unit) (Remote control unit)or orMODE musicMODE cinema