Denon AVR-2105 Operating Instructions Manual

Also see for AVR-2105: Operating instructions Specifications Operating instructions Service manual Operating instructions

29ENGLISH5 Display the surround parameter menu.SURROUNDPARAMETER(Main unit) (Remote control unit)6 SURROUNDPARAMETER(Main unit) (Remote control unit)Select the various parameters.7 Adjust the parameter settings.SELECT(Main unit) (Remote control unit)8 Press the ENTER button to finish surround parametermode.(Remote control unit)2 Dialogue NormalizationThe dialogue normalization function is activated automatically when playing Dolby Digital program sources.Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level(standard level) of the signals which are recorded at different levels for different program sources, such as DVD,DTV and other future formats that will use Dolby Digital.These contents can be verified with the ON SCREEN/DISPLAY button.The number indicates the normalization level when the currently playingprogram is normalized to the standard level.OFFSET - 4dBDisplayChecking the input signalThe input signal can be checked by pressingthe remote control unit’s ON SCREEN/DISPLAY button.SIGNAL: Displays the type of signal(DTS, DOLBY DIGITAL, PCM,etc.).fs: Displays the input signal’s sampling frequency.FORMAT: Displays the input signal’s number of channels.“Number of front channels/Number of surroundchannels/LFE on/off”“SURROUND” is displayed for 2-channel signal sourcesrecorded in Dolby Surround.OFFSET: Displays the dialog normalization offset value.FLAG: Displays the special identification signal recorded in theinput signal.“MATRIX” is displayed when matrix processing isconducted on the surround back channel, “DISCRETE” isdisplayed when discrete processing is conducted.Not displayed when no identification signal is recorded.In addition, screen information is displayed in the followingorder when the ON SCREEN button is pressed repeatedly:OSD-1 Input signalOSD-2 Input/outputOSD-3 Auto surround modeOSD-4~10 Tuner preset stationsNOTE:OSD-3: This is displayed when the auto surround mode is set to “ON” and the input mode isset to “Auto”.It is not displayed when the input mode is set to “Analog” or “EXT. IN”.(Remote control unit)NOTE:• When making parameter settings, the display will return to the regular condition several seconds after thelast button was pressed and the setting will be completed.