Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Operating instructions Control protocol Operating instructions Brochure & specs Operating instructions

ENGLISH20ENGLISHBasic Operation Basic OperationDolby Pro Logic IIx (Pro Logic II) mode• To play in the PLIIx mode, set “S. BackSp” at the “SpeakerConfiguration” setting to “1sp” or “2sp”.• To play in the PL PLIIx mode, set “Surround Back” at the“Power Amp Assign” setting.1 Press the STANDARD button to select the DolbyPro Logic IIx mode.• The Dolby Pro Logic II indicator lights.lightsDTS NEO:6DOLBY PLIIx3 Press the SURROUND PARAMETER button toselect the surround parameter mode.2 Play a program source.4 Turn the SELECT knob, and press the CURSORFF or GG button to select the optimum mode forthe source.Display(Pro Logic IIx Cinema mode)(Pro Logic IIx Music mode)(Pro Logic IIx Game mode)When the “SB CH OUT” parameter is set to “OFF”. (Set“S. BACK” at system setup to “NONE”.)Display(Pro Logic II Cinema mode)(Pro Logic II Music mode)(Pro Logic II Game mode)(Dolby Pro Logic mode)The mode switches as shown below each time theSTANDARD button is pressed.For operating instructions, refer to the manuals of therespective components.When the “SB CH OUT” parameter is set to “ON”. (Set “S.BACK” at system setup to “SMALL” or “LARGE”.)See “Surround parameters q” for a description of thevarious parameters.6 Turn the SELECT knob, and press the CURSORFF or GG button to set the various surroundparameters.7 Press the ENTER button to finish the surroundparameter mode.5 Press the SURROUND PARAMETER button, andpress the CURSOR DD or HH button to select thevarious parameters.2 Surround parameters qPro Logic IIx and Pro Logic II Mode:The Cinema mode is for use with stereo television shows andall programs encoded in Dolby Surround.The Music mode is recommended for stereo music andsurround-encoded stereo music sources.The Pro Logic mode offers the same robust surroundprocessing as original Pro Logic in case the source content isnot of optimum quality.The Game mode is for playing games. The game mode can onlybe used with 2-channel audio sources.Select one of the modes (“Cinema”, “Music”, “Pro Logic” or“Game”).• Panorama Control:This mode extends the front stereo image to include thesurround speakers for an exciting “wraparound” effect withside wall imaging.Select “OFF” or “ON”.• Dimension Control:This control gradually adjusts the soundfield either towardsthe front or towards the rear.The control can be set in 7 steps from 0 to 6.• Center Width Control:This control adjusts the center image so it may be heard onlyfrom the center speaker; only from the left/right speakers asa phantom image; or from all three front speakers to varyingdegrees.The control can be set in 8 steps from 0 to 7.Example: DOLBY PLIIx music mode screen• When making parameter settings, the display will return to theregular condition several seconds after the last button waspressed and the setting will be completed.When the surround parameters are set using the buttons onthe main unit, stop operating the buttons after completingthe settings. The settings are automatically finalized and thenormal display reappears after several seconds.