Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Operating instructions Control protocol Operating instructions Brochure & specs Operating instructions

ENGLISHENGLISH54Specifications2 Audio section• Power amplifierRated output: Front: 90 W + 90 W(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)125 W + 125 W(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)Center: 90 W(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)125 W(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)Surround: 90 W + 90 W(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)125 W + 125 W(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)Surround Back: 90 W + 90 W(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)125 W + 125 W(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)Dynamic power: 120 W x 2 ch (8 Ω/ohms)170 W x 2 ch (4 Ω/ohms)200 W x 2 ch (2 Ω/ohms)Output terminals: Front: A or B 16 ~ 16 Ω/ohmsA + B 12 ~ 16 Ω/ohmsCenter, Surround, Surr.Back: 16 ~ 16 Ω/ohms• AnalogInput sensitivity /input impedance: 200 mV / 47 kΩ/kohmsFrequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)S/N: 100 dB (IHF-A weighted) (DIRECT mode)Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)Rated output: 1.2 V• Phono equalizer (PHONO input — REC OUT)Input sensitivity: 2.5 mVRIAA deviation: ±1 dB (20 Hz to 20 kHz)S/N: 74 dB (A weighting, with 5 mV input)Rated output /Maximum output: 150 mV / 7 VDistortion factor: 0.03 % (1 kHz, 3 V)2 Video section• Standard video terminalsInput / output leveland impedance: 1 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB• S-Video terminalsInput / output leveland impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohmsC (color) signal — 0.3 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB• Color component video terminalInput / output leveland impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohmsP B/CB (blue) signal — 0.7 Vp-p, 75 Ω/ohmsP R/CR (red) signal — 0.7 Vp-p, 75 Ω/ohmsFrequency response: DC ~ 100 MHz — +0, –3 dB2 Tuner section [FM] (note: μV at 75 Ω/ohms, [AM]0 dBf=1 x 10 –15 W)Receiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHzUsable Sensitivity: 1.0 μV (11.2 dBf) 18 μV50 dB QuietingSensitivity: MONO 1.6 μV (15.3 dBf)STEREO 23 μV (38.5 dBf)S/N (IHF-A): MONO 77 dB (IHF-A weighted)STEREO 72 dB (IHF-A weighted)Total Harmonic Distortion(at 1 kHz): MONO 0.15 % (1 kHz)STEREO 0.3 % (1 kHz)2 GeneralPower supply: AC 230 V, 50 HzPower consumption: 450 WMaximum externaldimensions: 434 (W) x 171 (H) x 417 (D) mmMass: 12.8 kg2 Remote control unit (RC-1016)Batteries: R6P/AA Type (two batteries)External dimensions: 55 (W) x 225 (H) x 34.5 (D) mmMass: 165 g (including batteries)* For purposes of improvement, specifications and design are subject to change without notice.Specifications